Bộ sưu tập theo ứng dụng
Các Technical Insights đã xuất bản được nhóm theo Laser Marking Pigments, sắp xếp theo trình tự kỹ thuật từ lựa chọn đến đánh giá.
Choose bulk compounding, masterbatch, coating, or printing from the required additive location, functional depth, carrier or binder compatibility, geometry, adhesion, durability, appearance, process capability, and scale-up boundary; nominal additive percentage does not make the routes equivalent.
Candidate controls include copper hydroxy-phosphate (BCHP) and Antimony Tin Oxide (ATO). For caps and closures, design the mark around the actual colour, curved geometry, moulding variation and line speed, then keep regulatory or contact compliance as a separate documented boundary.
For transparent PC, qualify additive haze, base tint and laser-induced scattering before optimizing contrast; a readable mark is not acceptable if the unmarked optical area leaves specification.
Laser wavelength, pulse timing, beam quality, spot and focus, power or pulse energy, repetition, scan speed, hatch, overlap, path, and part geometry jointly set optical coupling and the transient temperature-time-volume response; no single energy-density number describes the marking window.
Candidate controls include copper hydroxy-phosphate (BCHP). Find the minimum additive loading with a robust process window, then verify TPU flexibility and appearance; do not select the highest-contrast loading automatically.
Candidate controls include copper hydroxy-phosphate (BCHP). Choose powder or masterbatch by dispersion control, dosing accuracy, carrier compatibility, colour freedom, cleaning burden and lot traceability in the actual ear-tag compounding route.
Weak, gray, mottled, or inconsistent marks must be separated by symptom location and variation signature across material, formulation, dispersion, part, laser field, optics, tool, measurement, and time before additive loading or laser energy is changed.
Control PA and TPU moisture before compounding, moulding and marking because water changes processing defects and can change the apparent laser damage window.
Surface residue does not identify its source. Distinguish molecular migration, surface bloom, tooling plate-out, particulate transfer, and unrelated contamination with matched formulation controls, spatial and time-resolved evidence, deposit analysis, and recurrence testing.
Melting or reflow, charring or decomposition, warping, embrittlement, cracking, ablation, and surface damage have different thermal, chemical, mechanical, geometric, and process signatures; prevent them by defining a response-to-damage window and correcting the controlling source, material, path, or part boundary.
Use microscopy and controlled let-down checks to distinguish additive agglomerates from pigment clusters, contamination, unmelted carrier and moulding deposits.
Visible specks require physical defect identification: distinguish laser-active agglomerates from base pigments, contamination, unmelted carrier, degraded resin and exposed filler.
Candidate controls include copper hydroxy-phosphate (BCHP). A barcode or Data Matrix failure must be decomposed into encoded-data, geometry, quiet-zone, contrast, modulation, edge and verifier-condition causes; a successful phone scan is not qualification.
Uneven glass-filled marks require mapping fibre orientation and surface exposure against the laser path; average formulation data cannot explain gate, weld or flow-direction defects.
Candidate controls include copper hydroxy-phosphate (BCHP) and Antimony Tin Oxide (ATO). Treat moulding defects or pre-mark discoloration as formulation and process failures: audit additive identity, dispersion, carrier, moisture, thermal history and contamination before changing the laser.
Pre-mark base-colour change is an additive-selection and dispersion constraint: measure the unmarked compound before attributing all optical change to the laser.
Candidate controls include copper hydroxy-phosphate (BCHP). When marking changes between lots, cavities, tools or lines, use a blocked study that separates material, moulded-part and laser-system variation instead of retuning each part independently.
Candidate controls include copper hydroxy-phosphate (BCHP). Contrast falls at higher speed because pulse spacing, overlap and heat accumulation change; recover margin by mapping coupled laser variables and material response rather than increasing average power blindly.
Candidate controls include copper hydroxy-phosphate (BCHP). Blurry edges and halos usually arise from spot or focus error, excessive overlap, heat diffusion, scattering or part motion; diagnose geometry before changing chemistry.
Candidate controls include copper hydroxy-phosphate (BCHP) and Antimony Tin Oxide (ATO). Yellowing outside the intended mark is a separate failure from useful darkening; audit resin degradation, pigments, moisture, heat-affected zone and optical measurement before changing additive dosage.
A laser-marking recipe does not transfer automatically from a natural resin to colored, filled, or recycled versions. Rebuild the unmarked optical baseline, delivered additive state, response and damage map, and end-use qualification with controlled formulation substitutions.
Candidate controls include copper hydroxy-phosphate (BCHP). Bubbles or blisters indicate gas generation or trapped volatile expansion faster than the surface can relax; check drying, volatiles, degradation, energy density and repeated passes.
Candidate controls include Antimony Tin Oxide (ATO). For PC burning or yellowing, separate bulk resin or colour degradation from intended mark formation by mapping the lowest energy that meets contrast and inspecting the unmarked heat-affected area.
Candidate controls include copper hydroxy-phosphate (BCHP). A weak or gray PP mark usually means the formulation and delivered laser state do not cross a uniform contrast threshold; audit colour, additive dispersion, focus, pulse overlap and actual loading before increasing power.
